Pairing the Omron HN300T2 scale

Follow the steps below to pair your Omron HN300T2 scale in the Luscii app.

1. Bluetooth access:
   Make sure you have given the Luscii app access to Bluetooth. Follow this instruction. [insert link]

2. Turn on Bluetooth:
   Make sure Bluetooth is enabled on your mobile device. Follow this instruction. [insert link]

3. Open the Luscii app:

   • Open the Luscii app.

   • At the bottom of the app, go to the Home screen or Self-care screen and start a weight measurement by selecting Weight.

4. Prepare the scale:

   • Insert the batteries into the scale.

   • Press and hold the button on the front of the scale for 5 seconds.

   • Once the scale shows a flashing “P”, it will start pairing.

5. Connect the Luscii app to the scale:

   • Follow the instructions in the Luscii app.

   • When choosing the measurement method, select Omron HN300T2.

   • Tap Next to complete the pairing.

   • After pairing is complete, you can take a weight measurement.

   • If you have questions about taking a weight measurement, see the Frequently Asked Questions at the bottom of this page.

Important note
Make sure you pair the scale via the Luscii app and not directly through your phone’s Bluetooth settings or via the Omron Connect app.

Help with problems
Still unable to connect your scale to the Luscii app? Please contact Luscii Support.